Table of Contents
Advertisement
Basic Scanning for PC Users
Scanning Photos
1. Place the photo.
To scan a photo, place the photo on the scanner
bed. The top end of the original should be positioned
towards the right of the scanner, with the surface to
be scanned facing down.
2. Launch ScanWizard EZ.
To launch ScanWizard EZ as a stand-alone program, double-click
the ScanWizard EZ icon on your desktop. When ScanWizard EZ is
launched for the first time, the control panel of ScanWizard EZ -
EZ Mode appears automatically.
Switches to
the Professional Mode
Switches to
the Advanced Mode
Activates
the Preferences window
3. Scan your material.
Click the Scan button on the control panel of EZ Mode to start scanning.
The ScanWizard EZ will detect the photo on the scanner glass surface first, next
automatically calibrate the scanner, crop the image, and finally perform the image
scan with factory settings. When done, the scanned image can be saved in a file and
delivered to the specified location.
Select preferences if necessary
Before you start scanning, specify image settings related to your output image in
the Preferences window according to your preferences.
Auto Settings – Switches on/off Auto-crop and Auto-deskew, and applies ACE
(Automatic Color Enhancement) to the image.
Scan Mode – Sets the image resolution and scan quality to match your target
application.
Save – Assigns the folder location, a file name, and the file format for the output
image.
Also, it allows you to specify an application to open the image.
Theme – Changes the appearance of the control panel for the EZ mode.
NOTE: For details about how to use the ScanWizard EZ's Advanced Mode and
Professional Mode, refer to the ScanMaker i460 Supplement.
Press the Scan
button to start
scanning
5
Minimizes ScanWizard EZ
Exits ScanWizard EZ
Advertisement
Table of Contents
