Table of Contents
Advertisement
Do You Need Assistance?
Manuals
If you have additional questions and need further instruction or information, we provide
electronic manuals for:
1. Using your ScanMaker i460 (Supplementary information)
2. Using the ScanWizard EZ or ScanPotter scanning software
3. Using the bundled third-party software
To access the electronic manuals: Insert the scanner's software CD/DVD into your
computer's CD/DVD-ROM drive. Next, locate and click the "Manuals" option when the
software installer window appears on your screen. Finally, select and click the title of the
manual you wish to view.
Missing Items
If your package is missing items, please call the Microtek Customer Service Department.
Drivers & Software Upgrades
After you finish the installation of software, if you found that the installed drivers and
software cannot run your product or your computer system properly later, please go to
the Microtek Download Service site at ww7.microtek.com.tw/service.php to download
and install any updates you may require.
For additional information about Microtek products, please visit our website at
www.microtek.com.
Power Adapter
Use only power supplies (AC/DC adapters) listed below:
Voltage
Manufacturer
100V to 240V
WUXI HARD
100V to 240V
WUXI HARD
100V to 240V
WUXI HARD
100V to 240V
WUXI HARD
NOTE: Please make sure that the electrical outlet to where the scanner will be
connected is nearby and readily accessible.
Copyright © 2013 Microtek. Microtek, ScanMaker, ArtixScan,
ScanWizard and ColoRescue are trademarks or registered trademarks of
Microtek International, Inc. All other trademarks or registered
trademarks are the property of their respective holders. Specifications,
software and hardware bundles are subject to change without notice.
Delivery of technical support services subject to change without notice.
Not responsible for typographical errors.
Model No.
HDAD-120015-3C (U.S./TWN)
HDAD-120015-3B (Europe)
HDAD-120015-3D (AUS)
HDAD-120015-3E (UK)
10
Advertisement
Table of Contents
