Microtek ScanMaker i800 Plus Start Here Manual
  1. Manuals
  2. Brands
  3. Microtek Manuals
  4. Scanner
  5. ScanMaker i800 Plus
  6. Start here manual

Microtek ScanMaker i800 Plus Start Here Manual

Hide thumbs Also See for ScanMaker i800 Plus:
Table of Contents

Advertisement

Quick Links

Download this manual
Start Here
Installing your Microtek ScanMaker i800 Plus
Step 1:
Unpack your scanner package and
check for major components.
1. ScanMaker i800 Plus
2. USB cable
3. Power adapter
4. Power cord
5. Software CDs/DVDs
6. EZ-Lock™ Film Holders
Step 2:
Important:
Do not remove the yellow stickers from your scanner
until you are told to do so. You must install software before
connecting your scanner.
Always close any open programs, and turn off Anti-virus utilities
before installing software.
PC:
A. Place the Adobe DVD into a drive, and
install the software. Skip this step if you
have a newer version of Photoshop
Elements already installed on your
computer.
B. Place the Microtek Software CD/DVD into a
drive, and follow the on-screen instructions
to install the scanner driver and software.
C. Restart your computer at the end of all
software installation.
NOTE: If the Microtek Software Installer screen does not come
up automatically, double-click the following in succession: "My
Computer"; the CD-ROM (or DVD-ROM) icon; then cdsetup.exe
to start the installer program.
Copyright © 2013
Microtek International, Inc.
I49-004872 B, September 2013
Unpack Contents
1
2
Install Software
http://www.microtek.com
5
4
3
MAC:
A. Place the Adobe DVD into a drive, and install
the software. Skip this step if you have a
newer version of Photoshop Elements already
installed on your computer.
B. Place the Microtek Software CD/DVD
(ScanPotter) into a drive, and double-click the
ScanPotter installer icon to install ScanPotter.
C. Install the remaining software components,
then restart your computer at the end of all
software installation.
NOTE: After rebooting your Macintosh, the Microtek software will
attempt to locate your scanner on the system. Since this is your
first install and you have not yet connected the scanner, simply
ignore the message that appears and proceed to the next step.
1
6

Advertisement

Table of Contents
loading

Related Manuals for Microtek ScanMaker i800 Plus

Summary of Contents for Microtek ScanMaker i800 Plus

  • Page 1 NOTE: If the Microtek Software Installer screen does not come NOTE: After rebooting your Macintosh, the Microtek software will up automatically, double-click the following in succession: “My attempt to locate your scanner on the system.

  • Page 2: Unlock Scanner

    “unlocked”. Locked Unlocked NOTE: To lock the scanner (for shipping and other reasons), refer to the ScanMaker i800 Plus Supplement. Step 4: Connect Scanner To the digitizer lid Make sure the scanner lid (TMA) is properly installed, with its connector securely connected to the scanner’s 15-pin...

  • Page 3: To The Hi-Speed Usb Cable

    Power button Scanner Buttons The ScanMaker i800 Plus is equipped with six scanner buttons, providing quick access to the most frequently used functions. These buttons are Scan, Copy, E-mail, OCR, PDF, and Custom. • Scan: Captures images that can be saved as files or sent to an image-editing application.
  • Page 4 Using the TMA A. To load film: 1. Load the film inside the EZ-Lock™ Film Holder, with the film’s shiny base facing down. • EZ-Lock 6 x 22 cm Film Holder • EZ-Lock 35mm Slide Holder • EZ-Lock 35mm Filmstrip Holder •...

  • Page 5: Scanning Photos

    Also, it allows you to specify an application to open the image. Theme – Changes the appearance of the control panel for the EZ mode. NOTE: For details about how to use the ScanWizard EZ ‘s Advanced Mode and Professional Mode, refer to the ScanMaker i800 Plus Supplement.

  • Page 6: Scanning Film

    Scanning Film 1. Place the film. To scan film, use the film holder. Refer to “Using the TMA” in this guide for more details. 2. Launch ScanWizard EZ. Follow the step 2 in “Scanning Photos” on previous page to launch ScanWizard EZ. 3.
  • Page 7 9. Click the Scan button to start scanning. NOTE: For details on scanning photos and film, see the ScanMaker i800 Plus Supplement in the Microtek Software CD/ DVD.
  • Page 8 Click the Scan Settings button to Scan frame switch back to the default control (enclosed by dotted lines) panel of ScanPotter Click the Image Settings button to switch to a window where contains a composite display of nine-image-effects (Filter column) and additional image correction tools (Additional Adjustment column) for your scanned image.
  • Page 9 Problems? The LEDs on the button panel indicate the status of the scanner. Orange Green On - Ready to scan Flashing - Scanning Sleep - Power saving LEDs Off - Scanner is off First, make sure that you have followed installation steps 1 through 4. If your problem is listed here, try the suggested solution.
  • Page 10 After you finish the installation of software, if you found that the installed drivers and software cannot run your product or your computer system properly later, please go to the Microtek Download Service site at ww7.microtek.com.tw/service.php to download and install any updates you may require.

Table of Contents