Toshiba PORTEGE Z830 Satellite Z830 Maintenance Manual page 323

4 Replacement Procedures
3. Turn up the insulator (INSU W-LAN) and secure the system board with the
following screws.
• M2×3B
4. Connect the DC-IN harness to the connector CN8800 on the system board and set it
to the slot of the cover assembly.
5. Connect the KB BL flexible cable, KB flexible cable, TP board FFC, speaker
harness and LCD harness to the connectors CN3241, CN3230, CN9550, CN6000
and CN5300 on the system board.
NOTE: When replacing the LCD harness with a new one, stick the square cushion
(black) in place.
6. Stick the glass tape in place.
4-38 [CONFIDENTIAL]
S-THIN HEAD
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
4.9 System board/Wireless LAN card
×2