Toshiba PORTEGE Z830 Satellite Z830 Maintenance Manual page 320

4.9 System board/Wireless LAN card
3. Take out the DC-IN harness from the slot of the cover assembly and disconnect it
from the connector CN8800 on the system board.
4. Turn up the insulator (INSU W-LAN) and remove the following screw.
• M2×3B
5. Remove the following screw and the system board.
• M2×3B
6. Disconnect the wireless LAN card from the connector CN2600 on the system board.
CN2600
System board
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
S-THIN HEAD
S-THIN HEAD
Figure 4-16 Removing the system board (2)
4 Replacement Procedures
×1
×1
Wireless LAN card
M2x3B S-THIN HEAD
Insulator
(INSU W-LAN)
DC-IN harness
M2x3B S-THIN HEAD
CN8800
[CONFIDENTIAL] 4-35