Toshiba PORTEGE Z830 Satellite Z830 Maintenance Manual page 321

4 Replacement Procedures
Installing the System board/Wireless LAN card
To install the system board/wireless LAN card, follow the steps below and refer to Figure 4-
15 to 4-16.
1. Connect the wireless LAN card to the connector CN2600 on the system board.
2. Set the system board in place.
NOTE: When replacing the system board with a new one, stick the INSU SQUARE, D
STICK TAPE, MIC CVER and SQUARE GUM in place.
4-36 [CONFIDENTIAL] PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
4.9 System board/Wireless LAN card