Library Utilities - HP Surestore Tape Library Model 3/30 Hardware Operator's Manual

Hardware Operator's Guide

Library Utilities

The Library Utilities menu displays diagnostic, error, and configuration options.
>
Library Diags
Examine FSCs
View Configuration
Set Configuration
Library Diagnostics
The Library Diagnostics menu displays library diagnostic options.
Get-Put Loop
Mount Diagnostic
Dismount Diag
Unlock CAP Test
Mount-Dismnt Loop Mounts and then dismounts a tape to a drive.
Initialize Mechs
Demo Mode
DLT Library
Library Diags
Examine FSCs
View Configuration
Set Configuration
Accesses diagnostic routines for the library.
Displays the last 20 fault symptom codes.
Displays the current library configuration.
Accesses library configuration options.
>
Get-Put Loop
Mount Diagnostic
Dismount Diag
Unlock CAP Test
Mount-Dismnt Loop
Initialize Mechs
Demo Mode
Removes diagnostic tape from the CAP, moves the robot,
returns the tape to the CAP.
Mounts a diagnostic tape into a drive.
Dismounts a diagnostic tape from a drive.
Unlocks the CAP and prompts the operator to manually
open and close the CAP.
Initializes the library and performs an audit.
Makes random tape moves. (You must have at least one
data cartridge in the library and at least one empty cell.)
CAUTION: Audit required— After exiting Demo
Mode, the host software should perform an audit
to update the location of the cartridge tapes.
The operator panel displays only
four lines. Use the arrow buttons
to scroll through the options.
Main Menu
2–5