Operator Panel Controls; Operator Panel Leds - HP Surestore Tape Library Model 3/30 Hardware Operator's Manual

Operator Panel Controls

Operator Panel Controls
The operator panel has five function buttons.
MENU
ENTER
Y B
SYSTEM RESET A recessed SYSTEM RESET button allows the operator to

Operator Panel LEDs

The operator panel has three LEDs:
Library Active
CAP Open
Service Required
2–2
The MENU button toggles the display between the Main Menu
and Library/Drive Status. The MENU button calls up the
previous (higher) level menu if the library displays one of the
nested menus.
The ENTER button has two functions:
— It selects the option indicated by the menu cursor (>).
— It opens the cartridge access port (CAP) when that is
enabled.
The Up (Y) and Down (B) arrow buttons control the menu
cursor for scrolling between options.
reset the library (terminate operation and reinitialize the
library) without affecting tape drive operation or erasing the
current library configuration.
The green Library Active LED is on during initialization,
then flashes when the processor card is active.
The amber CAP Open LED is on when the CAP door is
unlocked and ready for access.
The red Service Required LED indicates operator
intervention is required before the library can be used
further. Check the Status Display on the operator panel for
an indication of the problem.
Hardware Operator's Guide
DLT Library