Correcting the Faults
Network Server Division
•
Hardware/Software
Devices that may be faulted resulting in the event
•
Action:
This section provides a list of remedies to the event. These
actions should be attempted in the order they are displayed.
•
See Also:
Pointers to additional information sources relating to the event.
•
Disable the suspect component
If a failed component is detected and HP tools are going to be
used to inspect the server while it is offline, be sure to properly
disable the server node form the array using the Marathon
Manager.
•
Replace the Hardware
After all online and offline means of gathering data and testing
have been exhausted, then by now a failed component or
NetServer should be identified. Replace the failed component
with the same component only and configure the replacement
hardware exactly like its predecessor. The same BIOS and
firmware should be used and any configuration settings need to
Ch 7: Bsic Troubleshooting
7-9