HP NetServer AA 4000 Reference Manual page 107

Network Server Division
•
An alternative method to backup each IOP is to use a dedicated
NIC configured in each IOP for performing a CE controlled
network backup over the public CE network connection to the
dedicated backup network connection of the IOP. Below is the
network backup configuration for setting up a dedicated IOP
network connection.
1. After installing the new NIC cards and adding the driver,
configure the adapter bindings as follows:
•
IL Network Adapter
Enable – NetBEUI Protocol
Disable – TCP/IP Protocol
Disable – Wins Client (TCP/IP)
Enable – Marathon Datagram Services
Disable – Marathon Ethernet Provider
Enable – MTCEtx driver
•
Original Adapter (for default CE communication)
Disable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
•
Marathon MtcVnP Virtual Adapter
Enable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Disable - Marathon Datagram Services
Disable - Marathon Ethernet Provider
Disable - MTCEtx driver
•
New Network Adapter (for dedicated IOP communication to CE)
Disable - NetBEUI Protocol
Enable - TCP/IP Protocol
Enable - Wins Client (TCP/IP)
Ch 6: Backp and Restore
6-7