Part Numbers For Backup Configurations - HP NetServer AA 4000 Reference Manual

Part Numbers for Backup Configurations

Network Server Division
Pure-local backup
•
C5695A - HP SureStore TapeRack for HP 19" server rack,
includes one 0.9m SCSI cable, two 2.5m SCSI cables, and two
SCSI terminators (Tape Rack holds 4 tape devices –see below).
•
C5698A - HP SureStore DLT 70r (need two - 1 on each IOP).
•
C5696A - HP SureStore DAT 24r (need two - 1 on each IOP).
•
D5025A – PCI ultra-wide host bus adapter (one Adaptec AHA-
2940UW).
•
Backup Software - Computer Associates ArcServe IT 6.61
or Veritas Backup Exec 7.3.
Semi-Local backup
•
C5657A – HP SureStore DLT 70i internal tape drive for L-series
Netserver includes mounting tray, jumpers, and screws.
•
C1555D – HP SureStore DAT 24i internal tape drive for L-series
Netserver includes mounting tray, jumpers, and screws.
•
D5025A – PCI ultra-wide host bus adapter (one single channel Adaptec
AHA-2940UW). Note: use C1578B a dual-channel Adaptec AHA-
2940UW if using both internal and external tape device on same IOP.
•
D5013A – HP 10/100 TX network interface card (need 2 for
dedicated IOP LAN).
•
Backup Software - Computer Associates ArcServe IT 6.61 or
Veritas Backup Exec 7.3
Network backup
•
C5173J – HP SureStore 15 slot, 2 DLT 70 drive, rackmount
Library.
•
D5013A – HP 10/100 TX network interface card (need 4
additional NICs for dedicated backup network).
Ch 6: Backp and Restore
6-15