Common Problems; Cable And Terminator Part Numbers - HP 3000 9x9KS Service Manual

Common Problems

Common Problems in the Field:
• Maximum cable length exceeded.
• Improper Termination
• More than 1 device at the same address
• Damaged connector pins on High-Density cables.

Cable and Terminator Part Numbers

Tables 8-3 through 8-9 list all associated cables and terminators.
Part
Number
8120-5158
8120-4998
8120-5159
5063-1212
5063-1213
8120-5160
8120-5519
8120-5520
8120-5521
8120-5522
8120-5363
8120-5647
013045-005
013045-010
013045-009
013045-004
013045-011
Part
Number
5062-3384
5062-3383
5062-3388
5062-3386
5063-1218
Table 8-3 50 Pin Low Density
Product
Description
Number
92222A Bail to Bail (M/M) 0.5 m
92222B Bail to Bail (M/M) 1.0 m
92222C Bail to Bail (M/M) 2.0 m
C2927A Bail to Bail (M/M) 3.0 m
C2928A Bail to Bail (M/M) 5.0 m
92222D Bail to Bail (M/F) 1.0 m
C2900A Bail to Bail (M/F) 3.0 m
C2901A Bail to Bail (M/F) 5.0 m
C2902A Bail to Bail (M/F) 10.0 m
C2903A Bail to Bail (M/F) 20.0 m
K2284 Bail to Thumb Screw 1.0 m
K2283 Bail to Thumb Screw 1.5 m
K2207 Thumb Screw to Thumb Screw 0.5 m
K2208 Thumb Screw to Thumb Screw 2.4 m
K2209 Thumb Screw to Thumb Screw 1.5 m
K2210 Thumb Screw to Thumb Screw 0.9 m
K2211 Thumb Screw to Thumb Screw 3.0 m
Table 8-4 50 Pin Low Density to High Density
Product
Description
Number
Bail to Thumb Screw 0.5 m
K2296 Bail to Thumb Screw 1.0 m
K2297 Bail to Thumb Screw 1.5 m
Bail to Thumb Screw 2.0 m
Bail to Thumb Screw 2.5 m
SCSI and I/O 8-7