Configuring Vrrp For Ipv6; Vrrp For Ipv6 Configuration Task List; Specifying The Type Of Mac Addresses Mapped To Virtual Ipv6 Addresses - HP 6125G Configuration Manual

Task
Display VRRP group status.
Display VRRP group statistics.
Clear VRRP group statistics.

Configuring VRRP for IPv6

VRRP for IPv6 configuration task list

Task
Configuring a VRRP operation mode
Specifying the type of MAC addresses mapped to virtual IPv6
addresses
Creating a VRRP group and configuring a virtual IPv6 address
Configuring router priority, preemptive mode and tracking function
Configuring VF tracking
Configuring VRRP packet attributes
Specifying the type of MAC addresses mapped to virtual IPv6
addresses
After you specify the type of MAC addresses mapped to the virtual IPv6 address of VRRP groups and
create a VRRP group, the master in the VRRP group uses the specified type of MAC address as the source
MAC address for sending packets and uses the specified type of MAC address to answer ND requests
from hosts so that the hosts in the internal network can learn the mapping between the IPv6 address and
the MAC address.
The following types of MAC addresses are available to be mapped to the virtual IPv6 address of a VRRP
group:
Command
display vrrp [ verbose ] [ interface
interface-type interface-number
[ vrid virtual-router-id ] ] [ | { begin
| exclude | include }
regular-expression ]
display vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ] [ | { begin
| exclude | include }
regular-expression ]
reset vrrp statistics [ interface
interface-type interface-number
[ vrid virtual-router-id ] ]
130
Remarks
Available in any view
Available in any view
Available in user view
Remarks
Optional.
Optional.
When VRRP is operating in load
balancing mode, this configuration is
not effective.
Required.
Optional.
Optional.
The VF tracking function is effective
only when VRRP is operating in load
balancing mode.
Optional.