HP 6125G Configuration Manual page 157

State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track Information:
Track Object
Forwarder Switchover Track Information:
Track Object
Member IP
Track Object
Member IP
The output shows that in VRRP group 1, Switch A is the master and Switch B and Switch C are the
backups. Each switch has one AVF and two LVFs that act as the backups.
# When VLAN-interface 3 on Switch A fails, use the display vrrp verbose command to display the
detailed information about VRRP group 1 on Switch A.
[SwitchA-Vlan-interface2] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Member IP List : 10.1.1.2 (Local, Master)
Forwarder Information: 3 Forwarders 0 Active
Config Weight
Running Weight : 5
Forwarder 01
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 02
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 03
State
: Active
: 000f-e2ff-0013 (Owner)
: 0000-5e01-1105
: 255
: local
: 1 State : Positive
: 2 State : Positive
: 10.1.1.2
: 3 State : Positive
: 10.1.1.3
: Load Balance
: Virtual MAC
: 1 Adver Timer
: Up State
: 120 Running Pri
: Yes Delay Time
: None
: 10.1.1.1
10.1.1.3 (Backup)
10.1.1.4 (Backup)
: 255
: Initialize
: 000f-e2ff-0011 (Owner)
: 0000-5e01-1101
: 0
: 10.1.1.4
: Initialize
: 000f-e2ff-0012 (Learnt)
: 0000-5e01-1103
: 0
: 10.1.1.3
: Initialize
150
Weight Reduced : 250
: 1
: Master
: 120
: 5