Configuring System Time - Samsung SVR-1680 User Manual

User Manual

6.2.1 Configuring System Time

Changing the system time after files have been recorded and saved will
affect the time data of the recordings. Therefore, it is recommended that
important visual data are copied before any changes to the system time.
-
Press [MENU] on the front side of the console or click
- Go to "Quick Setup".
- Select "System Time" of "Quick Setup" with [ENTER] or left-click.
-
If the instructions have been followed correctly, a window similar to the sample used in 6.2
System Time Setup will appear.
-
To move to lower level entries, use the directional buttons or the mouse to select them
and press [ENTER] or left-click.
Time Zone
Select time zone using the directional buttons on the front side of the console or the mouse
wheel. The menu will cycle through the time zones. (To return to the previous menu, press
[ESC] on the front side of the console or right-click. This method will apply the same throughout
the OSD menus.)
Daylight Saving Time
The system time zone will determine this menu. In other words, this option will only be enabled
if the selected time zone uses DST. The product has been programmed to synchronize DST
settings with Microsoft Windows. This menu is offered to allow the user to disable DST.
For detailed information on NTP, please refer to "NTP" under Network Setup.
Date Format
Select the time presentation format. Choose the desired format among "MM/DD/YYYY",
"YYYY/MM/DD" and "DD/MM/YYYY" using the directional buttons or the mouse wheel.
Date/Time
Use the left/right buttons to move between Year, Month, Date and Time. Use the up/down
buttons or the mouse wheel to adjust.
Apply Date/Time
To apply changes to these menus, "Apply" must be selected. Selecting the button will pop up a
in the function menu.
40