BIOS Setup Utility
3-2.3 System Boot Control Settings
System Boot
Control Settings
Quick Power On
Self Test
Boot Sequence
Swap Floppy
Drive
Boot Up
NumLock
Status
Memory Parity
Check/ ECC
Check
Setting
Disabled
Enabled
A, C, SCSI
C, A, SCSI
C, CD-ROM, A
CD-ROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C
Disabled
Enabled
On
Off
Enabled
Disabled
SY-5SSM & SY-5SSM/5 V1.1
Description
Provides a fast POTS at
boot-up.
Choose the boot
sequence adapted to
your needs, for example:
l [A, C, SCSI] means
the BIOS will look for an
operating system first in
drive A, then in drive C,
and eventually in SCSI
device.
Changes the sequence
of A and B drives.
Puts numeric keypad in
NumLock mode at boot-
up.
Puts numeric keypad in
arrow key mode at boot-
up.
This allows to perform a
redundancy check on the
parity bit in the data
strings. This method is
used for error detection
when the parity is not
found.
44
Note
Defaul
t
Default
Default
Default