Table of Contents
Advertisement
Hardware Setup
Congratulations on your purchase of SY-5SSM V1.1 or SY-5SSM/5
V1.1 Super 7
your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 Preparations
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1.
Pentium compatible processor with CPU cooling fan.
2.
DIMM memory module
3.
Computer case and chassis with adequate power supply unit
4.
Monitor
5.
Keyboard
6.
Pointing Device (PS/2 mouse)
7.
Speaker(s) (optional)
8.
Disk Drives: HDD, CD-ROM, Floppy drive ...
9.
External Peripherals: Printer, Plotter, and Modem (optional)
10.
Internal Peripherals: Modem and LAN cards (optional)
Frequently Asked Questions:
Do I need to install a VGA card?
l
Do I also need to install a sound card?
l
The answer is NO to both questions above, since, the SY-5SSM
V1.1 or SY-5SSM/5 V1.1 Motherboard already features one built-in
VGA port and three built-in audio-stereo ports (Line-out, Line-in,
Microphone).
Note: If you plan on using the onboard VGA and intend to install
only one DRAM memory module, then this single DRAM must be
installed starting with bank DIMM1.
What kind of speaker can connect to "Line-out" port?
l
This Motherboard requires a speaker with built-in amplifier to
generate proper output sound volume.
Chapter 2
HARDWARE SETUP
Motherboard. You are about to install and connect
SY-5SSM & SY-5SSM/5 V1.1
6
Hide quick links:
Advertisement
Table of Contents
