Oki C911dn Troubleshooting Manual page 72

Replacing consumables and maintenance unit
10
Install Tray 1.
1
2
11
Switch on the main power supply, press
the power supply switch and start the
printer.
12
Please support recycling of the used
paper feed rollers.
Memo
z When disposing of the used paper feed rollers in
unavoidable circumstances, put them in a plastic
bag, and ensure to dispose according to the
instructions provided by the local municipality.
Replacing the paper feed
rollers and separator of Multi-
Purpose Tray
There are three types of paper feed rollers.
Center is white
With gear
Tip of the center is black
Items to be prepared: Paper feed rollers 2 nos.,
separation roller 1 no., separator 1 no.
1
Remove wrist watch, bracelet, etc.
2
Press and hold the power switch for
approximately 1s to switch off the
power supply.
3
Check that the operation panel is
completely turned off, and then switch
off the main power supply.
- 72 -