Oki C911dn Troubleshooting Manual page 38

When some other message appears
Message displayed on the
Index
liquid crystal panel
Japanese Check Data
1
"t" column Message Data Write Error
<[CODE]>
Install Transfer Roller Unit
Re-set the transfer roller unit
Please see HELP for details
The data will be deleted due to an
overprint feature error
2
Mount the duplex printing unit
and print again. To turn off the
display, press OK
Please see HELP for details
The data will be deleted due to an
overprint feature error
Check the paper and paper
settings, then print again. To turn
off the display, press OK
Please see HELP for details
Spot Color has been replaced
Press OK to change the Spot Color
settings in the menu to [COLOR]
and restart the system
If you do not want to change
settings, return Spot Color toner,
image drum and Spot Color duct
settings to [MENUCOLOR].
Spot Color has been replaced
Check Spot Color menu settings
Current setting is [MENUCOLOR]
To turn off the display, press OK
Spot Color settings changes
Shut down and restart to enable
new settings
Spot color duct has not been
installed
Please install the Spot Color Duct
Please see HELP for details
Toner cartridge not properly
installed
Reset [COLOR] Toner Cartridge
Please see HELP for details
[COLOR] Toner Not Installed
Please see HELP for details
Error <ATTENTION>
code lamp
- - Failed to write the message data
to be updated. Check data.
334 Blinking The transfer roller unit is not set
correctly.
Press the [HELP] button, and
solve according to the guidance
shown on the Help screen.
458 Blinking Spot Color over printing is
specified, but the 2-Sided Printing
unit is not there. Printing was
stopped and the print data was
deleted.
Install the 2-Sided Printing unit
and print once again.
Press the [OK] button for deleting
the display of the liquid crystal panel.
(C941/ES9541dn only)
456 Blinking Paper used for printing is not
compatible for Spot Color over
printing. Printing was stopped and
the print data was deleted.
Change the paper, or set to
Normal and print once again.
Press the [OK] button for deleting
the display of the liquid crystal
panel.
(C941/ES9541dn only)
679 Blinking Spot Color has been exchanged
Solve according to the message.
(C941/ES9541dn only)
678 Blinking Spot Color has been exchanged
Solve according to the message.
(C941/ES9541dn only)
677 Blinking Spot Color setting has been
changed.
Solve according to the message.
(C941/ES9541dn only)
676 Blinking Spot Color duct has not been
installed.
Please install the Spot Color duct.
(C941/ES9541dn only)
5440 Blinking The toner cartridge shown in the
5441 message is not set correctly.
5442 Press the [HELP] button, and
5443 solve according to the guidance
5444 shown on the Help screen.
5445
6100 Blinking The toner cartridge shown in the
6101 message has not been installed.
6102 Press the [HELP] button, and
6103 solve according to the guidance
6104 shown on the Help screen.
6105
- 38 -
Causes and
Troubleshooting
Reference
pages
-
-
-
-
-
-
-
-
-
-