Oki C911dn Troubleshooting Manual page 66

Replacing consumables and maintenance unit
5
Remove the new fuser unit from its
packaging.
1
6
Hold the new fuser unit handle with
2
both hands, and set it to the exit unit.
7
Push down the fuser unit's lock lever
(blue).
8
Put the output unit back into the printer.
9
Please support recycling of the used
fuser units.
Memo
z When disposing of the used fuser unit in
unavoidable circumstances, put it in a plastic bag,
and ensure to dispose according to the instructions
provided by the local municipality.
- 66 -