Belt Clip - Kenwood TK-3230 Instruction Manual

 Slide a battery pack or a
transceiver equipped with a
battery pack into the battery pack
slot.
• Make sure the metal contacts of
the battery pack mate securely
with the charger terminals.
• The indicator lights red and
charging starts.
 When charging is completed, the
indicator lights green. Remove
the battery pack or the transceiver
from the battery pack slot.
• It takes approximately 2.5 hours to
charge the battery pack.
• When the charger will not be used
for a long time, unplug the AC
adapter from the AC outlet.
i / r
nStAlling
If desired, attach the belt clip to the
rear of the transceiver using the 2
supplied screws.
B
emoving the
Indicator
c
elt lip
Charger
terminals