Quiet Talk/ Digital Quiet Talk; Hannel - Kenwood TK-3230 Instruction Manual

qUiet taLk/ digitaL qUiet taLk

QT (Quiet Talk) and DQT (Digital Quiet Talk) are functions
that reject signals from undesired parties that are using the
same channel as you. You will hear audio from the speaker
only when you receive a signal that contains a tone or code
matching the one set up on the channel you are using.
Likewise, when you transmit on a channel set up with QT or
DQT, the receiving station must have a matching tone or code
in order to hear your signal.
You can select a tone or code for each channel. There are
39 QT tones and 83 DQT codes. After changing the QT/ DQT
setting, confirm that the other members in your group have
selected the same tone or code.
 Press the MENU key.
• The current setting blinks.
 Press the
• The values range from 01 to 39 for QT tones, then proceed to
01 to 83 for DQT codes. When selecting a DQT code, the
icon appears on the display.
• Select "
• Refer to pages 52 and 53 for the tones/codes corresponding to
the QT/DQT numbers.
 Press the MENU key 4 times, or press the PTT, MON, or
CAL key or after mode reset time has elapsed {page 47} to
confirm the selection and return to operating mode.
6
or key to select your desired value.
" to turn off both QT and DQT.