Kenwood TK-3230 Instruction Manual page 43

 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
Note: Transceiver's individual ID number is not available for
selection as PTT ID.
■ ptt id S
ide
When the PTT switch is pressed and/or released, a tone
will sound through your own speaker when the PTT ID is
transmitted.
To turn the PTT ID Side Tone on or off:
 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
 Press the
 Press the MENU key then press
"
Side Tone is off).
 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.

t
one
or key to select "
" (PTT ID Side Tone is on) or "
".
or to select
" (PTT ID