Printing Across A Network; Setting Ip Address; Ipv4 Configuration Using Setip - Dell B2375dfw User Manual

Printing Across a Network

Whether the printer is locally connected or network-connected, you need to install the Dell
B2375dfw Mono MFP or Dell B2375dnf Mono MFP software on each computer that prints
documents using the printer.

Setting IP address

First, you have to set up an IP address for network printing and managements. In most cases
a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration
Protocol) server located on the network.

IPv4 configuration using SetIP

Before using the SetIP program, disable the computer firewall from Control Panel
Security Center Windows Firewall.
1 Download the software from the Dell website then unpack and install it:
(http://www.dell.com
2 Follow the instructions in the installation window.
3 Connect your machine to the network with a network cable.
4
Turn on the machine.
5 From the Windows Start menu, select All Programs
B2375dfw Mono MFP or Dell B2375dnf Mono MFP
6 Click the icon in the SetIP window to open the TCP/IP configuration window.
7 Enter the machine's new information into the configuration window. In a corporate
intranet, you may need to have this information assigned by a network manager
before proceeding.
NOTE: Find the machine's MAC address from the Network Configuration
Report. See "Printing a network configuration report". and enter it without the
colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.
8 Click Apply, and then click OK. The machine will automatically print the Network
Configuration Report. Confirm that all the settings are correct.
find your product Support or Downloads).
- 212
­
Dell Printers Dell
SetIP.