Installing Dell Software For Network Printing - Dell 1600n User Manual

If necessary, select a language by pressing the Language button on the main screen.
3
Select Personal Installation.
4
Select Typical Installation to install the MFP drivers for printing and scanning, and
5
user's guide as default settings.
To install only selected software, select Custom Installation. If you want to use a PS
driver, select Custom Installation. You can change the destination directly.
When the installation is completed, you may print a test page. Click Finish to
6
complete the installation and close the wizard. You are now ready to print.

Installing Dell Software for Network Printing

(Correct introduction required!!)
When you connect your printer to the network, you must first configure the TCP/IP
settings for the printer. After you have assigned and verified the TCP/IP settings, you are
ready to install the Dell software on each network computer.
You can install the Dell software on the network computers locally or remotely.
NOTE: You need administrative access to install printer drivers on the network computers.
Make sure that the printer is connected to your network and powered on. Close all
1
unnecessary programs.
35