Making Copies; Using Copy And Setting Options; Number Of Copies - Dell B2375dfw User Manual

Making Copies

NOTE: A computer connection is not required for copying.
NOTE: Contaminating on the document glass may cause black spots on the
printout. For best results, clean the document glass before use. See "Cleaning the
scanner".
1 Load the document(s) face up with the top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".
2 Customize the copy settings including the number of copies, copy size, the darkness,
and the image quality by using the operator panel. See "Using Copy and Setting
Options".
3 Press Start ( ) on screen to begin copying.
NOTE: You can cancel the copy job at any time. Press (
the copying will stop.

Using Copy and Setting Options

The Copy menus on the operator panel let you customize all the basic copy options;
number of copies, duplex, zoom, darkness, original size, original type, tray, layout, collation,
stamp and watermark. Set the following options for the current copy job before pressing
Start ( ) to make copies.

Number of Copies

You can select the number of copies from 1 to 199.
1 Press Copy from the home screen.
2 Press the left/right arrows to find Number of Copies.
3 Press the -/+ buttons to select the number of copies you want.
4 Press Start ( ) on screen to begin copying.
NOTE: You can cancel the copy job at any time. Press (
the copying will stop.
- 187
­
) on screen, and
) on screen, and