Setting the Quick Dial (Administrator only)
Set the speed dial numbers.
1
Press My Settings
Or
Press and hold the Speed Dial1(
panel for less than 2 seconds.
2
Select number you want.
3
Choose the appropriate option.
•
Add (
) Quick Dial number1 : Stroed at Quick Dial 1.
•
Add (
) Quick Dial number2 : Stored at Quick Dial 2.
•
Delete (
) Quick Dial number : Delete the Quick Dial number.
4
Press
and home icon (
Setting the Media Overwrite (Administrator only)
You can select the method for overwriting the secure non-volatile memory (hard disk).
1
Press My Settings
home screen.
2
Selects option you want.
•
DoD 5220.28M : Select to overwrite the memory 3 times. When overwriting three
times, patterns 0x35, 0xCA, 0x97 are used to overwrite the disk's content. This
method of overwriting the disk is specified by US DoD.
•
Australian ACSI 33 : Select to overwrite the memory 5 times. When overwriting 5
times, character "C" and its complement alternatively are used to overwrite the
disk. After the 2nd time, there is a mandatory validation. For the 5th time, random
data is used.
•
German VSITR : Select to overwrite the memory 7 times. When overwriting for the
6 times, alternate 0x00 and 0xff are used to overwrite the disk, and, in the 7th
time, the disk is written with 0xAA.
•
Custom : Select to determine the number of times the memory will be
overwritten. The hard disk will be overwritten as many times as the number you
select.
3
Press Start ( ) on the screen.
If you select Yes, all jobs will be delete and system reboot immediately.
Changing Admin Password (Administrator only)
You can change admin passwod.
1
Press My Settings
from the home screen.
2
Enter the new password and confirm password.
Press Check(
Machine Setup
Speed Dial Setting from the home screen.
) or Speed Dial2 (
) to return to Home Screen.
Machine Setup
Initial Setup
Machine Setup
Initial Setup
) then home icon (
- 72
) button on the control
Media Overwrite from the
Change Admin Password
) to return to Home Screen.