Operation Panel Built In The Machine Head - JUKI DDL-8700B-7 Instruction Manual

3. Operation panel built in the machine head

Ⓐ
❶
Ⓓ
Ⓑ
❷
❹

Used to change over the automatic reverse
❶
feed stitching at the beginning of sewing
between enable and disable.
Used to change over the automatic reverse
❷
feed stitching at the end of sewing between
enable and disable.
Used to change over the automatic double
❸
reverse feed stitching at the beginning of
sewing between enable and disable.
Used to change over the automatic double
❹
reverse feed stitching at the end of sewing
between enable and disable.
Used to change over the reverse feed
❺
stitching pattern between enable and
disable.
Used to change over the overlapped stitch-
❻
ing pattern between enable and disable.
❼
Used to change over the constant-dimen-
sion stitching pattern between enable and
❽ disable.
Ⓒ ❸
Display section A
❾  
❾







– 20 –
Ⓔ ❺ 
Used to change the contents displayed
on the display section.
Used to carry out compensating stitch-
ing in half-stitch steps.
Used to change over the one-shot
automatic stitching between enable and
disable.
Used to change over the soft-start func-
tion between enable and disable.
Used to change over the needle bar
stop position at the time of stopping
sewing between up and down.
Used to change over the thread trim-
ming operation between enable and
disable.
Used to change over the operation
mode to the function setting mode.
Used to confirm the settings changed
under the function setting mode.
Ⓖ
❼

Ⓕ
❻

Ⓗ
❽