Audio Control - Lincoln MKZ Hybrid Owner's Manual

Easy Entry and Exit Feature
When you switch the ignition off, the
steering column will move to the full
up and forward position to allow extra
room to exit your vehicle. The column
will return to the previous setting
when you switch the ignition on. You
can enable or disable this feature in
the information display. See
Information Displays (page 103).
Memory Feature
The steering column position saves
when you do a memory set function.
You can recall it with the memory
feature. See Memory Function
(page 147).
Pressing the adjustment control
during memory recall cancels the
operation. The column responds to
the adjustment control.
The steering column sets a stopping
position just short of the end of the
column position to prevent damage
to the steering column. A new
stopping position sets if the steering
column encounters an object when
tilting or telescoping.
To reset the steering column to its
normal stopping position:
1. Press the steering column control
again after encountering the new
stopping position.
2. Continue pressing the control until
it reaches the end of the column
position.
MKZ (CC9)
Steering Wheel
A new stopping position is set. The
next time you tilt or telescope the
steering column, it will stop just short
of the end of the column position.

AUDIO CONTROL

You can operate the following
functions with the control:
E145979
Seek, Next or Previous
Press the seek button to:
•
•
Press and hold the seek button to:
•
•
76
A Volume up
B Volume down
C Seek up or next
D Seek down or previous
E Mute
tune the radio to the next or
previous stored preset
play the next or the previous track.
tune the radio to the next station
up or down the frequency band
seek through a track.
(IF EQUIPPED)