Dhcp Client List; Address Reservation - TP-Link TL-MR3420 User Manual

4.7.2

DHCP Client List

Choose menu "DHCP→DHCP Client List", you can view the information about the clients
attached to the Router in the next screen (shown in Figure 4-31 ) .
ID - The index of the DHCP Client

Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client.

Lease Time - The time of the DHCP client leased. After the dynamic IP address has

expired, a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the
current attached devices, click the Refresh button.
4.7.3

Address Reservation

Choose menu "DHCP→Address Reservation", you can view and add a reserved addresses
for clients via the next screen (shown in Figure 4-32).When you specify a reserved IP address
for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
MAC Address - The MAC address of the PC for which you want to reserve IP address.

Reserved IP Address - The IP address of the Router reserved.

Status - The status of this entry either Enabled or Disabled.

Click the Enable All/ Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
TL-MR3420
Figure 4-31 DHCP Clients List
Figure 4-32 Address Reservation
-47-
3G/4G Wireless N Router User Guide