TP-Link TL-MR3420 User Manual page 93

Auto Mail Feature - Indicates whether auto mail feature is enabled or not.

Mail Settings - Set the receiving and sending mailbox address, server address, validation

information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86.
From - Your mail box address. The Router would connect it to send logs.

To - Recipient's address. The destination mailbox where the logs would be

received.
SMTP Server - Your smtp server. It corresponds with the mailbox filled in the From

field. You can log on the relevant website for Help if you are not clear with the
address.
Authentication - Most SMTP Server requires Authentication. It is required by most

mailboxes that need User Name and Password to log in.

Note:
Only when you select Authentication, do you have to enter the User Name and
Password in the following fields.
User Name - Your mail account name filled in the From field. The part behind @ is

excluded.
Password - Your mail account password.

Confirm The Password - Enter the password again to confirm.

Enable Auto Mail Feature - Select it to mail logs automatically. You could mail the

current logs either at a specified time everyday or by intervals, but only one could be
the current effective rule. Enter the desired time or intervals in the corresponding
field.
TL-MR3420
Figure 4-86 Mail Account Settings
-84-
3G/4G Wireless N Router User Guide