TP-Link TL-MR3620 Installation Manual

Quick Installation Guide

AC1350 3G/4G Wireless Dual Band Router
TL-MR3620
Connect the Hardware
Verify the Hardware
Connection
Enjoy the Internet
3G/4G Router Mode
Router
Wait about 2 minutes and then confirm that the following
LEDs are solid on. If the Internet LED is green, your
router is connected to the internet successfully.
Power 2.4GHz 5GHz Internet USB
On On On Green On
Wired: Connect your computers to the router's Ethernet ports via Ethernet cables.
Wireless: Connect wireless devices using the SSID (network name) and wireless
password printed on the label at the bottom of the router.
1
Connect the power adapter to
the router and turn on the router.
2
Plug in a 3G/4G USB modem
3G/4G
with a SIM/UIM card.
USB Modem
Note:
If the Internet LED
If the 2.4GHz LED
the Wi-Fi button on the rear panel for about 2 seconds and both
the LEDs should turn solid on in a few seconds.
Wireless
Power Adapter
is off or orange, please refer to FAQ > Q5.
and 5GHz LED are off, press and hold
TL-MR3620 Wired