Factory Settings - NETGEAR N600 WNDR3400v3 User Manual

Supplemental Information
A.
This appendix provides factory default settings and technical specifications for the N600
Wireless Dual Band Router WNDR3400v3.

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Restore Factory Settings button on the back of the router for at least
5 seconds. The router resets and returns to the factory settings. Your device returns to the
factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature
Router login
Internet
connection
Local network
(LAN)
User login URL
User name (case-sensitive)
Login password (case-sensitive)
WAN MAC address
WAN MTU size
Port speed
LAN IP
Subnet mask
DHCP server
DHCP range
Time zone
Time zone daylight saving time
Allow a registrar to configure this
router
Default behavior
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
10/100 Mbps Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
Disabled
Enabled
110
A