Back Panel - NETGEAR N600 WNDR3400v3 User Manual

Back Panel

The back panel has the connections shown in the following figure.
See Factory Settings on page 110 for information about restoring factory settings.
N600 Wireless Dual Band Router WNDR3400v3
USB 2.0 port
.Restore Factory Settings button. Press and hold this
button for about 5 seconds to reset the router to its factory
default settings.

Four local area networks (LAN) 10/100 Mbps Ethernet
ports for connecting the router to your local computers.
Internet/Wide Area Network (WAN) Ethernet port for
connecting the router to a cable or DSL modem.
AC power adapter outlet for connecting the power adapter.
Power On/Off button
Hardware Setup
13