Wireless Repeating Function - NETGEAR N600 WNDR3400v3 User Manual

Wireless Repeating Function

Select Advanced > Advanced Setup > Wireless Repeating to view or change wireless
repeater settings for the router.
• Enable Wireless Repeating Function. Select the check box for the 2.4 GHz or 5 GHz
network to use the wireless repeating function.
Wireless MAC of this router. This field displays the MAC address for your router for
your reference. Enter this MAC address in the corresponding Wireless Repeating
Function screen of the other access point you are using.
• Wireless Repeater. If your router is the repeater, select this check box.
Disable Wireless Client Association. If your router is the repeater, selecting this check
box means that wireless clients cannot associate with it. Only LAN client associations are
allowed.
- If you are setting up a point-to-point bridge, select this check box.
- If you want all client traffic to go through the other access point (repeater with wireless
client association), leave this check box cleared.
Repeater IP Address. If your router is the repeater, enter the IP address of the other
access point.
Base Station MAC Address. If your router is the repeater, enter the MAC address for the
access point that is the base station.
• Wireless Base Station. If your router is the base station, select this check box.
Disable Wireless Client Association. If your router is the base station, selecting this
check box means that wireless clients cannot associate with it. Only LAN client
associations are allowed.
N600 Wireless Dual Band Router WNDR3400v3
Advanced Settings
81
Scroll to view
more settings