Back Panel - NETGEAR N600 DGND3700v2 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2

Back Panel

The back panel has the Power On/Off button and port connections shown in the figure:
Figure 3. Back panel port connections
Viewed from top to bottom, the back panel contains the following elements:
1. RJ-11 asynchronous DSL (ADSL) port for connecting the wireless modem router to an
ADSL line
Note: An ADSL port is capable of sending data over an ADSL line at one
speed and receiving it at another speed.
2. USB port for connecting USB storage devices like flash drives or hard drives
3. Four Gigabit-Ethernet RJ-45 LAN ports for cabling the wireless modem router to the local
computers
4. One Gigabit-Ethernet WAN port for connecting the wireless modem router to a fiber or
cable modem
1. ADSL line
2. USB port
3. Gigabit-Ethernet LAN ports
4. Gigabit-Ethernet WAN port for connecting to external
cable or fiber modem
5. AC power adapter input
6. Power On/Off button
Hardware Setup
13