Set Up Bandwidth Control - NETGEAR R6100 User Manual

not support WMM and applications that do not require QoS, are assigned to the best effort
category, which receives a lower priority than voice and video. WMM QoS is enabled by
default.

To disable WMM QoS:
1. Select ADVANCED > Setup > QoS Setup.
2. Clear the Enable WMM check box for the band (2.4 GHz or 5 GHz).
3. Click the Apply button.

Set Up Bandwidth Control


To set up the maximum uplink bandwidth:
1. Select ADVANCED > Setup > QoS Setup.
2. Leave the Enable WMM check boxes selected.
3. (Optional) To prioritize Internet traffic, select the Turn Internet Access QoS On check box.
4. (Optional) To detect the current uplink bandwidth, click the Check button.
This helps you to determinate the maximum bandwidth setting
5. Select the Turn Bandwidth Control On check box.
6. Use one of these methods to specify the maximum bandwidth:
• To use the current uplink bandwidth, select the Uplink bandwidth radio button.
• Select the Automatically check Internet uplink bandwidth radio button.
7. Click the Apply button.
R6100 WiFi Router
Advanced Home Settings
40