Table of Contents
Advertisement
IX.
F.A.Q.
Q: I put a memory card into my Digicadre but the frame does not read it. What should
I do?
A: Make sure that the card format is compatible with the frame. Next, make sure that the
card has been inserted correctly into the corresponding slot. Finally, switch off and switch
back on your Digicadre so that the card is recognised by the reader.
Q: Why do some photos load quicker than others?
A: High resolution photos load slower. To reduce the loading time, it is better to adapt the
resolution of your images to that of the cadre, i.e. 1280 X 800 pixels. You can also use
lower resolution photos.
Q: Why can I not display a photo in black-and-white?
A: The Digicadre can read black-and-white photos only if they are in RVB mode, and not in
grey-scale format. To keep black-and-white images in RVB, all you have to do is de-saturate
the colours using image editing software.
Q: Why are my images slower to load with certain cards?
A: There are different card technologies. Certain cards are slower than others when being
read. If you are loading into internal memory, card reading occurs faster.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
42
Advertisement
Table of Contents
