Brightness Adjustment - Telefunken Digicadre 14001 User Manual

Fig.18
- +
B
Fig.19
With the frame
Press the button once to leave the slide-show and then press
Highlight "Reinitialise" using the
displayed (fig.17).
Select the desired option using the
Press to leave the menu, and then press
g. Brightness
With the remote control
Press the remote control's EXIT button and then press SETUP.
The menu is displayed (fig. 18). Using the UP/DOWN arrows, highlight "Brightness" and
then press ENTER. An adjustable brightness bar is displayed on screen (fig.19).
Press the RIGHT/LEFT arrows to adjust the brightness. Then press EXIT twice followed by
the "Slide show" button to launch the slide show again.
buttons, and then press
buttons and then press
to launch the slide-show again.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
34
.
. The two options are
to confirm your choice.