Using The Menu; Choosing The Language - Telefunken Digicadre 14001 User Manual

VI.
The default language is French. To choose another one, the menu must first be
accessed.
When the frame is in slide show mode and photos are being displayed, press the EXIT
button to leave the slide show, and then press SETUP to display the menu screen. On the
thirteenth line, the language is displayed (fig. 6). If you would like to change it, use the
remote control's UP or DOWN buttons, until the language line is highlighted (in blue), then
Fig.6
press ENTER. Every time this button is pressed, a different language is displayed.
(French, Spanish, Portuguese, Dutch, English, Italian, German). Once the menu is
displayed in the desired language, press EXIT followed by ENTER.
When the frame is in slide show mode and photos are being displayed, press
The menu screen is displayed.

USING THE MENU

1.

Choosing the language

With the remote control
With the frame
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
16
once.