Selecting The Display Type - Telefunken Digicadre 14001 User Manual

Fig.7
Press the buttons, until the language line (fig.6) is highlighted, then press
times as needed until accessing the desired language. Finally press

2. Selecting the display type

TELEFUNKEN DIGICADRE offers an exclusive function: Multiple display mode. This
mode allows you to simultaneously display 2, 3 or 4 images depending on their orientation
(vertical or horizontal).
With the remote control
When the frame is in slide-show mode and photos are being displayed, press the remote
control's EXIT button once, and then press SETUP. The menu is displayed. Use the UP
and DOWN buttons, until the "Multiple display" line (fig. 7) is highlighted. Press ENTER.
Two lines appear:
"Activate" and "None"
With the up/down arrows, highlight the option that you are interested in. If you highlight
the "Activate" option, multiple-display will be selected. If you select the "None" option, the
standard full-screen display will be activated. Press ENTER to confirm your choice, and
then EXIT to leave the menu. Press ENTER to launch the slide-show again.
, then
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
17
as many
.