Table of Contents
Advertisement
VIII. REMOVING THE BACK COVER AND CLEANING
Warning! Make sure that the Digicadre has been switched off before cleaning it. Never use
spray or liquid cleaner directly on the frame or on the plastic housing.
To clean your Digicadre, you can remove the back cover. To achieve this, unscrew the 4
screws situated at the back of your frame (fig.27) and gently remove the screen. To replace
the screen, place it in the frame and screw back in the 4 screws.
To clean the screen:
Wipe the screen with the supplied swab to remove dust and other particles. If the screen is
still not clean, apply a window cleaner (without ammoniac or alcohol) onto a soft and clean
cloth.
To clean the plastic case: Use a dry and soft cloth.
Fig.27
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
41
Advertisement
Table of Contents
