Table of Contents
Advertisement
When the frame is in slide-show mode and photos are being displayed, press the remote
control's EXIT button once, and then press SETUP. The menu is displayed. Use the UP
and DOWN buttons, until the "Multiple display" line (fig. 8) is highlighted.
Press the ENTER button to display the options, then select the desired image size using
the UP and DOWN buttons. Press ENTER to confirm your choice, and then press EXIT to
leave the menu. Press ENTER to launch the slide-show again: your images will be
displayed in the desired dimension.
Fig.8
When the frame is in slide-show mode and photos are being displayed, press the
button once, then press
buttons. Press
then press
show again.
You are able to choose the transition type between each of the images of your slide-
show.
With the remote control
With the frame
to display the options. Select the desired size with the
to confirm your choice. Press the
4. Transition between the images
. Highlight the "Image dimension" (fig. 8) line, using the
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
button, then
to launch the slide-
19
buttons,
Advertisement
Table of Contents
