Contrast Adjustment - Telefunken Digicadre 14001 User Manual

Fig.20
- +
C
Fig.21
With the frame
Press and then .
The menu is displayed (fig.18). Highlight Brightness and then press
brightness bar is displayed on the screen (fig.19).
Press to adjust the brightness. Next press
to launch the slide-show again.
h. Contrast
With the remote control
Press the remote control's EXIT button and then press SETUP. The menu is displayed
(fig.20). Highlight "Contrast" with the UP/DOWN arrows and then press ENTER. An
adjustable contrast bar is displayed on screen (fig.21). Press the RIGHT/LEFT arrows to
adjust the contrast. Next press EXIT twice and then "Slide show" to launch the slide-show
again.
. An adjustable
twice to return to the thumbnails. Press
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
35