An image can be rotated when it is not correctly orientated for example.
When the frame is in slide show mode and photos are being displayed, press the EXIT
button to display the thumbnails. Select the photo that you wish to rotate using the remote
control's UP/DOWN RIGHT/LEFT buttons.
Press ENTER to display it in full screen, and then press the remote control's ROTATE
button as many times as is needed to rotate the image to the correct orientation (fig. 15).
Then press EXIT, followed by "Slide show" to launch the slide show again.
Fig.15
When the frame is in slide show mode and photos are being displayed, press
the slide show and to display the thumbnails.
c. Rotating an image
With the remote control
With the frame
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
28
to leave