Toring Aedial; Nserting A; Ause In The Sequence; Reviewing , Changing Or - GE 55908580 User Manual

letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4
times for the letter S; press the 6 key once for the letter M; press the 4
key 3 times for the letter I; press the 8 key for the letter T; press the 4 key
twice for the letter H.
6. Press the memory button again to save your selection. The display
shows ENTER TEL NUMBR .
NOTE: If you make a mistake press the delete button on the base or del/
chan button on the handset to backspace and erase the wrong
character(s) or number(s).
7. Use the touch-tone pad to enter the area code followed by the
telephone number (up to 24 digits, including pauses) and press the
memory button again to save your selection. The unit beeps to confirm.
8. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
S R
TORING A EDIAL
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press redial button to display the redial number and name.
3. Press memory again to confirm.
NOTE :If the number you want to redial has more than 24 digits, the
telephone number cannot be stored in memory.
I P

NSERTING A

Press the #pause button on the touch-tone pad to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a
dial tone (for example, after you dial 9 for an outside line, or wait for a
computer access tone.) Each pause counts as 1 digit in the dialing sequence.
R , C
EVIEWING
To Review: Press memory on the handset or base, then press the CID/rev
or CID/skip buttons on the base or the CID-VOL (- or + ) buttons on the
handset to scroll through the stored numbers. Or press the memory
location number.
24
N

UMBER

D
AUSE IN THE
D
HANGING OR
S
IALING EQUENCE
S
ELETING TORED
N /N
AMES

UMBERS