Ystem From; Memory Full - GE 55908580 User Manual

A
CCESSING THE
You can access your answering system from any touch-tone phone
by entering your 3-digit security code after you hear the
outgoing announcement.
1. Dial the phone number to which the answering system is connected.
2. When the answering system answers enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
TIP: During remote access you may bypass the outgoing announcement by
pressing any number key on the touch-tone pad while the announcement is
playing. Then, enter your security code to access the answering system.
M F
EMORY ULL
When you access your answering system remotely, and the answering
system's memory is full, the system answers after 10 rings, beeps, and
waits for you to enter the 3-digit security code. You have 7 seconds to enter
the security code before the phone disconnects. You should erase some
old messages so the system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
The remote feature enables you to perform the following functions:
To
Review message
Play back messages
Stop message playback
Erase message
Skip message
Turn off/on answering system
Review voice menu options
36
A S
NSWERING

YSTEM FROM

A
NOTHER
Press this Button
1
2
2
0 (during message playback)
3
4
7
L
OCATION