Message Indicator; Alls At The Message Playback; Erasing Messages - GE 55908580 User Manual

M I
ESSAGE NDICATOR
The new message indicator flashes to indicate you have new messages.
S C
CREENING ALLS AT THE
1. Make sure the phone stops ringing, and the answering system starts.
NOTE: No key press is required; you can hear the caller's voice through the
speaker on the base.
2. Press the speaker button any time to speak to the caller.
TIP: Make sure the volume on the base is set loud enough for you to hear
incoming calls.
NOTE: After you press speaker on the base, the answerer stops recording, and
the base enters into the talk mode.
M P
ESSAGE LAYBACK
The new message indicator lets you know when you have new messages.
To play messages, press the play/stop button. While a message is playing,
you may do the following:
1. Press the play/stop button on the base to stop message playback.
2. Press CID/rev button on the base once to re-play the current message.
3. Press CID/rev button twice to review previous messages.
4. Press CID/skip button to skip to the next message.
5. Press the delete button to erase the current message.
E M
RASING ESSAGES
You may erase messages at the base two ways:
To erase a message while it is playing-
1. Press and release play/stop button.
2. Press CID/rev or CID/skip buttons to play the message you want to erase.
3. Press the delete button on the base. MESSAGE #ERASED shows in
the display.
B
ASE
33