Three -Way Intercom; Memory; S N M; Toring A - GE 55908580 User Manual

T -W I
HREE AY NTERCOM
1. Press the page/int button (base) or intercom button (cordless handset)
during an external call.
The external caller is placed on hold, and a paging tone sounds at the
base or cordless handset. PAGING or PAGING HANDSET displays on the
originating unit and PAGE FROM HANDSET or PAGING FRM BASE on
the other unit.
2. The sending party may press the conference button on the base or
conference/memory button on the handset to retrieve the external caller.
Three-way conference begins, and CONFERENCE shows in the display.
NOTE: The handset or the base can enter conference directly by pressing
talk/call back button on the handset or speaker button on the base while the
other party (handset or base) is on the external line.
M
EMORY
The cordless handset and base each have their own separate memory
storage areas. Store ten 15-character names and 24-digit telephone
numbers in the handset memory, ten 15-character names and 24-digit
telephone numbers in the base memory.
S N

TORING A

AME AND
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory button on the handset or base.
3. Press the desired memory location button (0 through 9 number keys) or
use the CID-VOL (- or + ) buttons on the handset or CID/rev or CID/skip)
buttons on the base to scroll to desired memory location. If the memory
location is occupied, the stored name and number displays. If the
memory location is unoccupied, EMPTY shows in the display.
4. Press the memory button again. The display shows ENTER NAME .
5. Use the base or cordless handset touch-tone pad to enter a name (up to
15 characters). More than one letter is stored in each of the number
keys. For example, to enter Bill Smith, press the 2 key twice for the letter
B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
C
ALLS
N M
UMBER IN EMORY
23