Toring Aedial; Nserting A; Ause In The Sequence; In Memory. - GE 21025/26 User Manual

NOTE: If you make a mistake, press the flash/delete button to erase the
incorrect character(s) or number.
6. Press the mem button to confirm your selection. The display shows
ENTER TEL NUMBR .
7. Use the touch-tone pad on your handset to enter the area code followed
by the telephone number (up to 20 digits, including pauses) and press
the mem button again to save your selection. The unit beeps to confirm.
8. To enter another name and number in a different memory location,
please follow step 1 and repeat the process.
S R
TORING A EDIAL
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the redial button.
3. Press the mem button again to confirm. You will hear a
confirmation tone.
NOTE: If the redial number has more than 20 digits, the redial number
cannot be stored in memory.
I P

NSERTING A

If a pause is needed to wait for a dial tone press the # pause button on the
touch-tone pad to insert a delay in dialing sequence of a stored telephone
number (for example, after you dial 9 for an outside line, or wait for a
computer access tone.) Each pause counts as one digit in the dialing
sequence.
ENTER TEL NUMBR
N
UMBER
D
AUSE IN THE
#
MEMO
S
IALING EQUENCE
0 3
31